G&D DVI-Vision-IP-Fiber, Инструкция по установке и эксплуатации

Страница: 160 / 240

Initial configuration of the network settings
G&D DVI-Vision-IP-Fiber · 35
English
Initial configuration of the
network settings
The
Management
interface allows the integration of a device into a separate network
for accessing the web application and using the extended network functions (net-
work filter, syslog,...) of the devices.
The required configuration settings can be made directly at the console.
NOTE: In the default settings the following settings are preselected:

IP address of
Network Interface »Network Management«
:
192.168.0.1

global network settings: settings are obtained via
DHCP
IMPORTANT: At the console, you can use the local hotkey ( default : Alt + Num ) to open
and configure the local OSD of the console module and the remote hotkey ( default :
Ctrl + Num ) to open and configure the remote OSD of the computer module.
During the starting process of the console module the settings of both hotkeys are
shown (see Starting process on page 15).