G&D DVI-Vision-CAT-AR, Инструкция по установке и эксплуатации

Страница: 76 / 140

The DVI-Vision-CAT series
3 · G&D DVI-Vision-CAT
The DVI-Vision-CAT series
KVM extenders of the DVI-Vision-CAT series consist of a computer module and a user
modules.
Connect the computer to be operated as well as an optional console to the computer
module ( DVI-Vision-CAT-CPU ). The remote console is connected to the user module
( DVI-Vision-CAT-CON ).
Both the computer module and the user module are connected via a category 5e (or
better) twisted pair cable. Signals of keyboard, mouse and DVI video of the com-
puter connected are transmitted using these cables and enable you to operate the
computer remotely.
The computer can either be operated at the remote console of the user module or at
the local console of the computer module.
Available variants
The
DVI-Vision-CAT
series provides further variants that additionally enable the trans-
mission of USB 2.0 signals and the use of several monitors:
NOTE: When applying multi-channel and/or
ARU2
variants of the
DVI-Vision
sys-
tem, any additional signals are transmitted using further twisted pair cables.
Variant Video channels USB 2.0
DVI-Vision-CAT-AR
1 not supported
DVI-Vision-CAT-ARU 1 full speed
DVI-Vision-CAT-ARU2
1 high speed
DVI-Vision-CAT-MC2-AR 2 not supported
DVI-Vision-CAT-MC2-ARU
2 full speed
DVI-Vision-CAT-MC2-ARU2 2 high speed
DVI-Vision-CAT-MC3-AR
3 not supported
DVI-Vision-CAT-MC3-ARU 3 full speed
DVI-Vision-CAT-MC3-ARU2
3 high speed
DVI-Vision-CAT-MC4-AR 4 not supported
DVI-Vision-CAT-MC4-ARU
4 full speed
DVI-Vision-CAT-MC4-ARU2 4 high speed