G&D DVI-Vision-CAT-AR, Инструкция по установке и эксплуатации

Страница: 118 / 140

Configuration
45 · G&D DVI-Vision-CAT
Changing the colour of the information display
By default, information display are shown in light green. You can adjust the colour
of the information display in your personal profile.
In addition to the default colour light green the following colours are supported:
How to change the setting of the information display:
black
dark red
green dark yellow
dark blue purple
)
dark turquoise silver
yellow blue
fuchsia light turquoise
white
OSD
1. Press
Ctrl+Num
(default) to open the on-screen display.
2. Select the row
Console setup
and press
Enter
.
3. Select the row
Personal Pprofile
and press
Enter
.
4. Under
Display color
press
F8
to select the desired colour.
5. Press
F2
to save your settings.
Config
Pane
l
1. Click on KVM Extenders > [All Extenders] on the directory tree.
2. Double-click the computer module of the KVM extender you want to con-
figure.
3. Click on the tabs Remote > Extender systems > Personal profile .
4. Under Display colour you can select the desired colour.
5. Click OK to save your changes.