G&D DP1.2-VisionXG-Fiber Series, Инструкция по установке и эксплуатации

Страница: 131 / 156

Configuration
G&D DP1.2-VisionXG-Fiber · 50
English
Turn »Fallback compression« on or off
Activate Fallback compression if, in the event of a fibre failure, you want to transmit the
image data compressed over the remaining active fibres.
How to turn »Fallback compression« on or off:
Config
Panel
1. In the menu, click on KVM extender .
2. Click on the KVM extender you want to configure and then click
on Configuration .
3. Click on the tab General and then on the tab CPU .
4. In the Fallback compression field, you can select between the following
options:
Enabled  In the event of a fibre failure, the image data is compressed and
transmitted via the still active fibers ( default )
Disabled  The transmission of the image data is always uncompressed.
5. Click on Save .