G&D DP1.2-VisionXG-Fiber Series, Инструкция по установке и эксплуатации

Страница: 128 / 156

Configuration
47 · G&D DP1.2-VisionXG-Fiber
Reinitialising USB input devices
After connecting a USB keyboard or mouse to the KVM extender, the input devices
are initialised and can be used immediately.
Some USB input devices require a reinitialisation of the USB connection. Enable
the automatic reinitialisation of USB devices if a USB keyboard or mouse does not
respond to your inputs during operation.
Conf
ig
Pan
el
1. In the menu, click on KVM extender .
2. Click on the KVM extender you want to configure and then click
on Configuration .
3. Click on the tab General .
4. Click on the tab CPU if you want to configure the setting of the local work-
station (on the CPU module).
Click on the tab CON if you want to configure the setting of the remote
workstation (on the CON module).
5. In the Scancode set field of the Configuration section, select one of the follow-
ing options:
Set 2  activates scancode set 2 for PS/2 keyboard inputs
Set 3  activates scancode set 3 for PS/2 keyboard inputs
6. Click on Save .
7. Turn the KVM extender off and back on again.
After you turn the KVM extender on again, the keyboard is initialised and the
selected scancode set is applied.