G&D DP1.2-Vision-IP-Fiber, Инструкция по установке и эксплуатации

Страница: 198 / 240

Configuration
G&D DP1.2-Vision-IP-Fiber · 73
English
Changing hotkeys
If many applications that use hotkeys are operated on one computer or if different
KVM devices are used in one cascade, the number of available hotkeys might be
restricted.
In case an application or another device used within the cascade use the same hot-
key, the hotkey can be changed.
How to change the current hotkey:
NOTE: Select your desired key or key combination from the keys Ctrl , Alt , Alt Gr ,
Win or Shift .
OSD
1. Open the remote OSD of the computer module by pressing the remote hotkey
( default : Ctrl+Num ), if you want to change the hotkey for the remote OSD.
Open the local OSD of the console module by pressing the local hotkey
( default : Alt+Num ), if you want to change the hotkey for the local OSD.
2. Select the row System setup and press Enter (remote OSD) or F11 (local OSD).
3. Select the row Hotkey and press Enter .
4. Under Modifier , select at least one of the listed hotkey modifiers by selecting
the box with the arrow keys. Press F8 to confirm your selection:
Ctrl  Ctrl key ( default for remote hotkey)
Alt  Alt key ( default for local hotkey)
Alt Gr  Alt Gr key
Win  Windows key
Shift  Shift key
5. Press F2 to save your settings.