G&D DP1.2-Vision-Fiber, Инструкция по установке и эксплуатации

Страница: 131 / 152

Configuration
G&D DP1.2-Vision-Fiber · 52
English
Information display
Information displays are shown temporarily (5 seconds) in the upper left corner.
The information display can also be shown permanently or it can be disabled
How to change the setting of the information display:
ADVICE: If the temporary information display is active, you can press the hotkey
Ctrl+Caps Lock to repeat the caption.
OSD
1. Press Ctrl+Num (default) to open the on-screen display.
2. Select the row Console setup and press Enter .
3. Select the row Personal Profile and press Enter .
4. Under Display press F8 to select between the following options:
Off  information display is turned off
Temporary  information display is shown temporarily for 5 seconds ( default )
Permanent  permanent information display
5. Press F2 to save your settings.
Config
Pan
el
1. In the menu, click on Users .
2. Click on the user account you want to configure and then click
on Configuration .
3. Click on the tab KVM extender systems .
4. In the Show OSD info field, select between the following options:
Off  information display is turned off
Temp  information display is shown temporarily for 5 seconds ( default )
Perm  permanent information display
5. Click on Save .