G&D DP1.2-Vision-Fiber, Инструкция по установке и эксплуатации

Страница: 128 / 152

Configuration
49 · G&D DP1.2-Vision-Fiber
Selecting a keyboard layout for inputs via OSD
If the on-screen display shows other characters than entered on the console key-
board, the keyboard layout has to be adjusted.
Make sure which keyboard layout the connected keyboard uses and configure it in
the settings of the user module.
How to change the keyboard layout of the keyboard of the user module:
OSD
1. Press Ctrl+Num (default) to open the on-screen display.
2. Select the row Console setup and press Enter .
3. Under OSD key. layout press F8 to select one of the following options:
 German
 English (US)
 English (UK)
 French
 Spanish
 lat. American
 Portuguese
4. Press F2 to save your settings.
Config
Pa
n
el
1. In the menu, click on
KVM extender
.
2. Click on the KVM extender you want to configure and then click
on
Configuration
.
3. Click on the tab
General
and then on the tab
CON
.
4. In the
Keyboard layout
field, select between the following options:

German

English (US)

English (UK)

French

Spanish

lat. American

Portuguese
5. Click on
Save
.