G&D DP-Vision-CAT Series, Инструкция по установке и эксплуатации

Страница: 132 / 168

Configuration
G&D DP-Vision-CAT · 45
English
In such cases, reduce the colour depth of the image data to 18 bits. This way the
data volume to be transmitted can be reduced.
How to change the colour depth of the image data to be transmitted:
Freeze mode
If the cable connection between the computer module and the user module is inter-
rupted during operation, the KVM extender no longer displays an image at the remote
console.
Enable the Freeze mode if you want the last image that has been displayed at the user
module to be available until the connection is re-established.
To highlight an interrupted connection, the last available image can be displayed
with either a coloured frame and/or a Frozen popup and the time passed since the
connection has been interrupted.
NOTE: Depending on the image contents, reducing the colour depth may result in
slight colour grades.
OSD
1. Press
Ctrl+Num
(default) to open the on-screen display.
2. Select the row
Target setup
and press
Enter
.
3. Under
Color depth
press
F8
to select on of the following options:
24 Bit:
 transmits the image data with a maximum colour depth
of 24 bits (
default
)
18 Bit:
 reduces the colour depth of image data to 18 bits
4. Press
F2
to save your settings.
Confi
g
Pan
el
1. In the menu, click on KVM extender .
2. Click on the computer module (CPU) you want to configure and then click
on Configuration .
3. Click on the tab Video channels .
4. When using a multi-channel device, click on the desired video channel and
then click on Configuration .
5. Select one of the options given under Colour depth :
24 Bit:  transmits the image data with a maximum colour depth
of 24 bits ( default )
18 Bit:  reduces the colour depth of image data to 18 bits
6. Click on Save .