G&D DP-Vision-CAT Series, Инструкция по установке и эксплуатации

Страница: 123 / 168

Configuration
36 · G&D DP-Vision-CAT
Changing the time span of the input lock
When carrying out keyboard or mouse inputs at a console, the KVM extender auto-
matically locks the input devices of the concurrent console. The lock is lifted if no
input is made at the active console within the adjusted timing of the input lock
(default: 1 second).
After the lock has been lifted, both users can operate the computer again.
The time span of the input lock can be adjusted between 1 and 300 seconds.
How to change the timespan of the input lock:
Related topic:

Operating the KVM extender exclusively on page 20
OSD
1. Press Ctrl+Num (default) to open the on-screen display.
2. Select the row System setup and press Enter .
3. Select the row Hotkey and press Enter .
4. Under Multiuser input lock enter the desired timespan of the input lock (1 to
300 seconds).
5. Press F2 to save your settings.
Config
Pa
n
el
1. In the menu, click on KVM extender .
2. Click on the computer module (CPU) you want to configure and then click
on Configuration .
3. Click on the tab General and then on the tab CPU .
4. Enter the desired time period of the input lock (1 to 300 seconds) in the field
Multiuser input lock (in seconds) .
5. Click on Save .