G&D DL-DVI-Vision-IP Series, Инструкция по установке и эксплуатации

Страница: 191 / 228

Configuration
72 · G&D DL-DVI-Vision-IP
Changing the time span of the input lock
When carrying out keyboard or mouse inputs at a console, the KVM extender auto-
matically locks the input devices of the concurrent console. The lock is lifted if no
input is made at the active console within the adjusted timing of the input lock
( default : 1 second).
After the lock has been lifted, both users can operate the computer again.
The time span of the input lock can be adjusted between 1 and 300 seconds.
How to change the timespan of the input lock:
Related topic:
 Concurrent operation of the KVM extender on page 11
OSD
1. Press Ctrl+Num ( default ) to open the OSD.
2. Select the row System setup and press Enter .
3. Under Multiuser input lock enter the desired timespan of the input lock
(1 to 300 seconds).
4. Press F2 to save your settings.