G&D DL-DVI-Vision-IP Series, Инструкция по установке и эксплуатации

Страница: 174 / 228

Users and groups
G&D DL-DVI-Vision-IP · 55
English
Renaming a user group
How to rename a user group:
1. Press the Ctrl + Num ( default ) hotkey to open the OSD.
2. Select the User group setup entry and press Enter .
3. Select the user group you want to rename and press F5 .
4. Select the Name entry and press Enter .
5. Enter the new name and press Enter .
6. Press F2 to save your settings.
Changing the user group rights
The various user groups can be assigned with different rights.
The following table lists the different user rights. Further information on the rights
can be found on the indicated pages.
Name Right Page
Change own password Change own password page 60
Personal
profile
Change personal user settings page 59
Superuser right Unrestricted access to the configuration of the
system
page 58
Target access rights Access rights to a target module page 60
Target config Configuration of target modules page 60
Access to USB devices Access USB devices for all modules page 61
WebIf login Login to the
Config Panel
web application page 59