G&D DL-DVI-Vision-IP Series, Инструкция по установке и эксплуатации

Страница: 172 / 228

Users and groups
G&D DL-DVI-Vision-IP · 53
English
Enabling or disabling a user account
How to enable or disable a user account:
1. Press the
Ctrl
+
Num
(
default
) hotkey to open the OSD.
2. Select the
User setup
entry and press
Enter
.
3. Select the user account you want to (de)activate and press
F5
.
4. Select the
Enable
entry and press
F8
to select one of the following options:
5. Press F2 to save your settings.
Deleting a user account
How to delete a user account:
1. Press the Ctrl + Num ( default ) hotkey to open the OSD.
2. Select the User setup entry and press Enter .
3. Select the user account you want to delete and press F4 .
4. Select Yes and press Enter to respond to the prompt for confirmation.
IMPORTANT: If a user account is disabled, the user has no access to the KVM sys-
tem.
yes: user account activated
no: user account deactivated