G&D DL-DVI-Vision-Fiber-AR-CON, Инструкция по установке и эксплуатации

Страница: 114 / 136

Configuration
43 · G&D DL-DVI-Vision-Fiber
Adjusting the waiting period of the screensaver
The screensaver turns off the display of the console after the user has been inactive
for a defined period of time.
How to adjust the waiting period of the screensaver:
NOTE: This setting does not affect the screensaver settings of the computer con-
nected to the computer module.
OSD
1. Press
Ctrl+Num
(default) to open the on-screen display.
2. Select the row
Console setup
and press
Enter
if you want to adjust the screen-
saver of the remote console (at the
CON
module).
Select the row
Local console setup
and press
Enter
if you want to adjust the
screensaver of the local console (at the
CPU
module).
3. Under
Screensaver (min)
enter a waiting period (1 to 999 minutes) for the
screensaver.
Entering the value 0 disables the screensaver
.
4. Press
F2
to save your settings.
Config
Panel
1. Click on KVM Extenders > [All Extenders] on the directory tree.
2. Double-click the computer module of the KVM extender you want to con-
figure.
3. Click on the tab Local if you want to adjust the screensaver of the local con-
sole (at the CPU module).
Click on the tabs Remote > General if you want to adjust the screensaver of
the remote console (at the CON module).
4. Under Screensaver (minutes) enter a waiting period (1 to 999 minutes) for the
screensaver.
Entering the value 0 disables the screensaver .
5. Click OK to save your changes.