G&D CATVision, Инструкция по установке и эксплуатации

Страница: 126 / 152

Guntermann & Drunck GmbH Operating Instructions
CATVision (MC)
At the bottom of the window the entry OpenAccess can be found.
User Account CVM
1 USER 01
2 USER 02
3 USER 03
4 USER 04
... bis User 08
OpenAccess
SUPERVISOR
Esc Enter
Move to the entry and press
Enter
. The following window opens:
U S E R A C C O U N T C V M
O p e n A c c e s s
Account enabled: NO
User Name: OpenAccess
Set Account Defaults
IVT Access Yes
System Config Access No
User Account Access No
Change Password…
Esc Enter F1:Save
Move to the entry Account enabled and change it with Space to
NO
. Save your
settings with F1 .
With this OpenAccess is disabled and access to the CATVision system is only
possible with the log-in.
For activating OpenAccess again repeat the last procedure and change the
entry from NO to YES !
7.1.2 Access via Defined User
If you wish to protect the CATVision -system against undesired access, it is
useful to define Users in the menu UserAccount and assign this users with
certain rights.
As soon as the supervisor has defined users, the access to the system is
possible by entring a Login-Name and Password. To this user certain rights can
be assigned. The procedure of defining a user is described in chapter 6.2.3 .
page 52