G&D CATVision, Инструкция по установке и эксплуатации

Страница: 123 / 152

Guntermann & Drunck GmbH Operating Instructions
CATVision (MC)
ENTER will close the first entry and automatically will lead you to the second
array where you have to enter the password once again. With ENTER you
confirm the new password and go back to the USER ACCOUNT .
With F1 you save the new settings and go back to SELECT ACCOUNT .
Default : no password.
Interrupting the password change
ESC in the window CHANGE PASSWORD will interrupt the action and lead
you back to USER ACCOUNT .
Note:
If you abort the reentering of an existing password, the old password remains
activ.
Please keep the password in a safe place as at a loss a system access is
not possible anymore.
6.3 Mouse Utility
If the mouse of the computer does not work anymore during operation (mouse
cursor does not move) you have the possibility of re-initialization.
First check whether the connecting cables are fitted correctly.
First call up the FUNCTION menu ( CTRL + NUM ). Move by means of the
cursor control keys to the menu Mouse Utility .
By pressing ENTER a submenu will open which offers the following
possibilities:
M O U S E U T I L I T Y C V M
Enable Mouse ► for Unix ◄
Reset Mouse
Enable Intelli
Enable Int Explorer
Esc Enter
Warning! Only do the Enable/Reset suitable for the single computer!
page 49