G&D CATVision, Инструкция по установке и эксплуатации

Страница: 105 / 152

Guntermann & Drunck GmbH Operating Instructions
CATVision (MC)
page 31
6.1.4 Activating the Channel “Display”
With this you have the possibility to set the display of the selected computer or
system informations either to
 permanent => Perm or
 temporary => Temp (disappears approx 5 seconds after switching).
After having moved the cursor to the array DISPLAY you can select your
wanted option with SPACE (toggle) or Y + N .
For saving and closing this menu press F1 .
If you have selected the temporary setting, the channel display can be called up
anytime by pressing CTRL + CAPSLOCK (Default).
6.1.5 Setting the Display Po Colour
Here you set the position and size of the display on the monitor. Move the
cursor to the corresponding entry in the menu CONSOLE SETUP .
After having pressed ENTER you get to the edit mode and can move the
display with the cursor control keys or mouse to the wanted position.
+
[Display Position####]
Space: change colour
The modification of the colour of the displayed text is also possible. Press the
space bar to toggle between the different available colours.
ENTER closes the setting and leads you back to the CONSOLE SETUP
(temporary saved).
For saving the setting and closing the
CONSOLE SETUP
press
F1
(permanently saved).