Gamma Progression 600, Руководство пользователя

Страница: 10 / 15

9
FIXED CLAMP UPGRADE
Fixed Clamp Installation
To install the clamps, remove the winged lock
knob to separate the knob from the lower
guide bushing. Be careful not to lose the
radial thrust bearing components located in
the center recess of the knob.
Align the clamp base with the clamp slot of
the turntable base. Insert the clamp guide
bushing into the clamp from the bottom of the
turntable making sure to engage the guide
with the clamp slot.
Fixed Clamp Installation - (cont.)
Place the load bushing into the top of the
clamp base mating it to the lower guide
bushing.
After checking that the thrust bear-
ing is positioned correctly in the base of the
winged lock knob, screw the knob into the
base bushing until fully seated.
The post of the string clamp head and tube
of the string clamp base are treated with
grease to provide protection against corro-
sion during shipping. Remove any exces-
sive grease with a clean cloth prior to use.
The post and tube may also be cleaned with
isopropyl alcohol. After this type of thorough cleaning, the post and tube should be treated
with a light coating of machine oil to protect the surfaces against corrosion and to ensure
smooth operation.