Figure 15. TSP sublimation view screen (no control buttons)
9.14.
TSP sublimation view with controls
View pump - Switches home screen to pump view.
Menu - Invokes main menu.
Exit - Clears screen and hides control buttons.
Turn On TSP (Turn Off TSP) - Starts TSP programmed mode according to the
parameters defined in TSP setup window. If TSP programmed mode is
running this button will turn off TSP operation.
TSP setup - Invokes TSP setup screen.
Figure 16. TSP sublimation view screen with controls
9.15.
TSP setup
Available setup:
Filament - Selects active filament (1 - 4). Indicates filament status.
Filament status will read ‘(open?)’ if sublimation current did not reach 80% of
the target value at the end of the last sublimation cycle.
Page 29
900031_J
900031_J - Touchscreen user interface
