Gamewell IdentiFlex 610, Руководство по установке и эксплуатации

Страница: 89 / 158

IF 610 Installation and Operation Manual Issue 3, 10/04/00
Firmware Ver. 7
79
Card ID # Each type of card is assigned a unique 8 bit code that the card transmits to the
CPU when it is polled. In operation each card is periodically polled and returns
its type code. The CPU detects if the card is functioning correctly, for a card
type at that location. Refer to Table L4, IF 610 Card ID Type.
Card Location Card No. Card ID Type
Code
(hex value)
Card Description
Display Module
Card# 0 0C Alphanumeric (LCD) display card
Bus Driver Module
Card# 4 01 Signal Circuits
Bus Driver Module
Card# 5 02 Relays
Bus Driver Module Card# 6 05 Variety of features (city tie
supervision, ground fault, default
power supply supervision, +24 V,
+12V, +5V supervision, V-battery to
power supply, unregulated raw
supply, system on AC/Battery,
Charging Monitor, battery monitor,
aux 1 & 2).
Analog Addressable
Module Card# 17 09 XP95 analog addressable interface (1,
2 or 4 circuits)
Table L4, Typical Card ID Type
System Configuration
1. Select [1], the "Config" field.
2. Select “Display” [1], Press "
Enter ". ( Figure L-3 is an example of data shown ).
3. The alphanumeric screen will scroll and the user can view desired circuit.
4. Select “Download” [2] to download system configuration to a laptop
computer. Refer to IF 610 computer/laptop programming manual.
Card 00, ID# 0C is: A/N Panel
Card 04, ID# 01 is: CCM: 2 Sig Ckt, Class A
Card 05, ID# 02 is: CCM: 4 Rel Ckt
Card 06, ID# 05 is: CCM: City Tie, Buzzer etc.
Card 07, ID# 07 is: Unused
Card 17, ID# 09 is: Analog Addressable Interface
Figure L-3
4. Press " Enter " key for previous menu. Figure L-2, is shown.
Technical Manuals Online! - http://www.tech-man.com
firealarmresources.com