manualshive.com logo in svg

Gambro Cobe Spectra, Справочник по основам

Gambro Cobe Spectra - многофункциональный аппарат для диализа, обеспечивающий высокую эффективность и надежность. Чтобы узнать все возможности этого устройства, скачайте бесплатно Эссенциальное руководство на нашем сайте. Используйте ключевые слова "Скачать", "Руководство", "Бесплатно". Скачайте его на manualshive.com.

Поделиться
Скачать
background image

Introduction

2-2

COBE

®

Spectra™ Apheresis System • 

Essentials Guide

Spectra System Description

The Spectra system separates and collects blood components from 
donors and patients for cell therapy, therapeutic apheresis, and 
transfusion medicine applications. The system collects blood products 
from donors for transfusion to patients. It can concurrently collect 
plasma during platelet and WBC collections for use as plasma, fresh 
frozen plasma, or source plasma for further processing into Factor VIII 
and Factor IX concentrates.

The Spectra system with software version 5.1 LRS or version 7.0 LRS 
Turbo collects leukocyte-reduced, extended life platelets for transfusion.

The system can estimate platelet yields before a platelet collection 
procedure starts. This enables users to optimize donor pools by 
collecting multiple platelet products from donors with sufficiently high 
platelet counts and total blood volumes.

For patients undergoing therapeutic procedures, the Spectra system 
exchanges or depletes blood components. In addition, the system 
collects platelets and plasma from patients for autologous transfusion.

The Spectra system with software versions 4.7, 5.1, 6.1, and 7.0 
processes bone marrow, depletes WBCs, and collects mononuclear cells 
and granulocytes (polymorphonuclear cells) from donors or patients.

The Spectra system version 6.1 performs automated peripheral blood 
stem cell (PBSC) collection, including low volume collection. The 
system can also concurrently collect plasma with PBSCs for use in cell 
cryopreservation.

The system uses a Dual-Needle (one access needle and one return 
needle) or a Single-Needle (one access/return needle) disposable tubing 
set to collect platelets. Operators can convert TPE sets from Dual-
Needle to Single-Needle, if necessary. 

The Single-Needle procedure design keeps the extracorporeal volume 
low and the process time short. Since the procedure requires one 
venipunture for both access and return, it also offers greater comfort for 
donors and patients, and is easier for operators to manage.

The Spectra system includes the following:

•

A disposable tubing set, consisting of a separation channel that spins 
in the centrifuge to separate blood into its components, and tubing 
that routes blood and replacement fluid through the set. See 
“Disposable Tubing Sets” on page 2-21 for more information.

•

The COBE Spectra Apheresis System, an automated blood cell 
separation device which uses pumps, valves and sensors to control 
and monitor the extracorporeal circuit during apheresis procedures.

The software controls pump flow rates and centrifuge speed to 
establish and maintain the RBC/plasma interface. The control 
panel, including the display screen and keyboard, allows 
communication with the Spectra system. The automated system 
ensures donor/patient safety while allowing operator control. 
Additional features include quick system set-up, automatic tubing 
set Prime mode, predictable collection and exchange results, 
automatic Rinseback mode, and comprehensive troubleshooting 
display screen messages.

Figure 2-1 shows an exterior view of the Spectra system (without a 
flow path overlay or disposable tubing set installed).

Содержание Cobe Spectra






















































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Cobe Spectra

ABB Navigator 550 Manual preview
Navigator 550
Бренд: ABB Страницы: 6
Pall T Series Care And Use preview
T Series
Бренд: Pall Страницы: 51
ZAMST A1 Instructions For Use Manual preview
A1
Бренд: ZAMST Страницы: 21
Latchways R20 User Instructions preview
R20
Бренд: Latchways Страницы: 80
Kapriol 27956 Manufacturer'S Instruction And Information preview
27956
Бренд: Kapriol Страницы: 28
Baker Hughes Druck DPI 880 Instruction Manual preview
Druck DPI 880
Бренд: Baker Hughes Страницы: 168
IEMCA KID 80 Manual For Use And Maintenance preview
KID 80
Бренд: IEMCA Страницы: 82
IEMCA KID 80-IV Touch Instruction Manual preview
KID 80-IV Touch
Бренд: IEMCA Страницы: 122
Calrec ARGO Installation & Technical Manual preview
ARGO
Бренд: Calrec Страницы: 92
Martin Maxedia 4 User Manual preview
Maxedia 4
Бренд: Martin Страницы: 202
EuroLite SBPO-3240 Installation Instructions preview
SBPO-3240
Бренд: EuroLite Страницы: 2
Abus TAS 112 Installation And Operating Instructions Manual preview
TAS 112
Бренд: Abus Страницы: 8
Teac BB-1000CD Release Notes preview
BB-1000CD
Бренд: Teac Страницы: 2
Kelvin Epos 300 User Manual preview
Epos 300
Бренд: Kelvin Страницы: 30
popular Little i-PEN Manual preview
Little i-PEN
Бренд: popular Страницы: 27
Landoll 3631-30 Operator'S Manual preview
3631-30
Бренд: Landoll Страницы: 144
Castellini SKEMA 6 CP Manual preview
SKEMA 6 CP
Бренд: Castellini Страницы: 299
Lowenstein Medical elisa 300 Instructions For Use Manual preview
elisa 300
Бренд: Lowenstein Medical Страницы: 457

Бренды по названию

Популярные бренды

Загрузить еще бренды