© Copyright 2023 Gamber-Johnson, LLC
7160-1856
ZEBRA TC22 / TC27 CRADLE
Rev A
INST-1133
Printing Spec:
PS-001
This instruction sheet is for the Zebra TC22/TC27 cradle only. The cradle is designed to
hold a Zebra TC22 or TC27 handheld computer only. The 7160-1856 will not work with
older TC2x devices. For instructions on features, set-up, and operation of the Zebra
TC22/TC27 handheld computer, please refer to the manual provided by Zebra with the
computer.
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Revision
Form
Product
INSTALLATION INSTRUCTIONS
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brake lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
cable restraint
inserts
AMP's hole pattern
with #10-32 threaded
Cradle
slots to adjust
cable restraint
to fit USB-C cable
