Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
Rev.A
INST-839
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
Attaching the Zebra dock screen blanking mount to the Zebra docking station:
1. Remove the new cable restraint bracket from the screen blanking assembly by
removing the (2) #6-32 x 3/8" long mounting screws that hold it in place.
2. Replace the origonal cable restraint bracket on the Zebra dock with the new
cable restraint bracket removed from the assembly in step 1. Attach using the (2)
screws that held the origonal cable restraint on the dock.
Printing Spec:
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Form
Revision
PS-001
ZEBRA DOCK SCREEN BLANKING MOUNT
© Copyright 2017 Gamber-Johnson, LLC
7160-1146
Product
INSTALLATION INSTRUCTIONS
new cable
restraint bracket
origonal cable
restraint bracket
new cable
restraint bracket
#6-32 X 3/8" long
mouting screws
