Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
Rev.A
INST-811
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
vehicle base.
This instruction sheet is for the installation of the Ford F150 Transmission hump
Vehicle Base
front mounting
bracket
Step 5
. Reattach the center
seat bracket, with the
transmission hump vehicle base
between the bracket and the
floor.
mount using the hardware
supplied with the pole.
Note:
If the unit is being
mounted in a vehicle with a 4
Wheel drive shift lever mounted
on the transmission hump, then
the Support Leg must be
removed prior to installaion of
the mount.
Step 1
. Remove the passenger
seat.
Step 2
. Remove the center
seat. There are 5 bolts that
hold the center seat in place.
3 on the passenger side and 2
on the drivers side.
Step 3
. Remove the center
seat mounting bracket from
the floor.
Step 4
. Attach the pole to the
3 bolts on
passenger side
Center seat
Transmission Hump
DS-Lower Pole
Support
Leg
© Copyright 2017 Gamber-Johnson, LLC
7160-1046
Ford F150 Transmission Hump Vehicle Base
PS-001
Printing Spec:
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Revision
Form
Product
INSTALLATION INSTRUCTIONS
