Gamatronic GMAC-5, Руководство пользователя

Страница: 30 / 34

G
AMATRONIC
E
LECTRONIC
I
NDUSTRIES
L
TD
.
26 G5 User Guide
6.5 Power+ protocol alarms
Table 10: PowerPlus protocol alarms
N
UMBER
N
AME
D
ESCRIPTION
1 UPS modules warning More than 1 UPS Module is sending an alarm or fault warning
2 One UPS module warning Single UPS Module is sending an alarm or fault warning
3
More than 1 master
encountered
N.A.
4 Output voltage discrepancy N.A.
5 Load on bypass Load is now running on bypass
6 An alarm/s is vibrating Alarm(s) vibrating (alarm is frequently raised and lowered)
7 Over temperature Excess temperature
8 No AC output to load No ac output to load
9 High battery voltage Excessive battery voltage
10 Not used alarm 10 N.A.
11 End of backup End of battery backup. Battery is discharged to shutdown limit
12 Low battery voltage Low battery voltage
13 Static switch warning Static Switch warning or alarm
14
Emergency Power Off
activated
Emergency Power Off is active
15 Not used alarm 15 N.A.
16 Last battery test fail Batteries failed last test
17 User 1 input open User 1 input volt-free contact open (NC)
18 User 2 input open User 2 input volt-free contact open (NC)
19 User 3 input open User 3 input volt-free contact open (NC)
20 Input brownout Momentary input ac voltage failure
21 AC input high Ac input voltage is too high
22 AC input failure Ac input failure
23 STSW not responding Static Switch is not responding
24 Last self test failed Last controller self-test failed
25 Battery CB is open Battery circuit breaker is open
26
Suspect fault current
sharing
Possible current sharing fault
27
Suspect a fault output
stage
Possible fault (no current) in 1 or more module output stage
28 UPS shutdown UPS is shutdown
29 Load current high Overload
30
UPS or more not
responding
One or more modules not responding
31 Startup time-stamp Startup time-stamp, indicates controller startup, always present
32 User 4 input open User 4 input volt-free contact open (NC)