Gamatronic GMAC-5, Руководство пользователя

Страница: 29 / 34

G
AMATRONIC
E
LECTRONIC
I
NDUSTRIES
L
TD
.
GMAC 5 User Guide 25
6.3 SEC protocol alarms
Table 8: SEC protocol alarms
N
O
. N
AME
D
ESCRIPTION
1 Temperature fault Over temperature in the UPS
2 AC input failure Input ac voltage failure
3 Output bad Output voltage fault
4 Overload current Overload
5 Bypass bad Bypass input ac voltage fault
6 No AC output to load No ac voltage to the load
7 UPS shutdown The UPS is shutdown
8 Charger failure Charger (rectifier) fault
9 System off The entire UPS system is off
10 Fan failure Fan fault
11 Fuse failure Fuse fault
12 General fault General fault (enabled when at least one alarm is present)
13 Awaiting power UPS is awaiting for input power to startup
14 Shutdown pending Shutdown is pending
15 Shutdown imminent Shutdown is imminent
16 On battery The UPS is drawing power from battery
17 Low battery Battery power is critically low
18 Battery depleted Battery is depleted
19 On bypass Output source is on bypass
20 Test in progress A test is in progress
21 Battery bad UPS battery requires replacement
22 Diagnostic test failed Fault in diagnostic self test
23 Test completed Test completed
24 UPS off as requested The UPS has been turned off by request
25 Output off as requested The UPS’s output voltage has been switched off by request.
6.4 Megatec protocol alarms
Table 9: Megatec protocol alarms
N
O
. N
AME
D
ESCRIPTION
1 Ac input failure Input ac voltage failure
2 General fault General fault (enabled when at least one alarm is present)
3 Shutdown imminent Shutdown is imminent
4 Low battery Battery power is critically low
5 On bypass Output source is on bypass
6 Test in progress A test is in progress
7 Boost or buck is active Input voltage correction is active