G
AMATRONIC
E
LECTRONIC
I
NDUSTRIES
L
TD
.
12
G5 User Guide
5.
C
ONFIGURATION
All system configurations are performed under the configuration menu. Use this menu to update basic
system settings like identification names, and to quickly enable or disable system functions without
removing the functions from the current configuration.
The Identification information entered on this screen (Unit name, Site, Manager) appears on the main
screen upon entry into the system. This is to enable you to distinguish between units in the event that you
are operating multiple GMAC-5 units.
Figure 11: Configuration menu expanded
There are also three buttons near the top of the screen:
•
D
OWNLOAD CONFIGURATION
:
downloads to your computer a configuration file that can be kept for
future uploading through the bootloader to restore system configuration to the same state. The
restore works only if the system is of the same software version as was in effect at the time the
configuration backup file was created (unless otherwise mentioned in the documentation for the
new software release).
•
R
ESTORE TO FACTORY DEFAULTS
:
returns GMAC-5’s configuration to default factory settings
excluding password
. To restore the factory default user name and password (admin/admin) see
section
•
S
WITCH TO BOOTLOADER
:
causes GMAC-5 to reboot in bootloader mode. You must refresh the page
manually to see the bootloader web interface. It is possible that when switching to bootloader mode
the device will receive a different IP address. In bootloader mode GMAC-5 takes its IP address as
per the user’s instruction in the “Actual IP address” field in the “Configuration > Network” screen
(see section
