LRF240VPR1L
Instruction Manual
WWW.GAMAINC.COM
Included in this Kit:
(1) LRF240VPR1L Receiver
(1) 2-Button Transmitter
*Image shown with standard transmitter*
Available accessories:
- Additional Transmitter KF340-2
- Waterproof Transmitter KF340-2WP
- Rechargeable Battery Transmitter GKF-WPTX-2
- Wall Mount Power Supply EPS120050
- 6-Pack of Replacement A-23 12V Batteries A23-6
The LRF240VPR1L is an RF receiver operating at a fixed frequency of 340 MHz. The receiver operates from 240VAC
single-phase input power and provides a polarity reversing output for use with four/six wire lead AC motors rated at 1.5-
Horsepower. Up to thirty transmitters can be programmed and used to activate the receiver's relay. The receiver has
terminal blocks for connecting the input power and output relay contacts to the motor.
Each transmitter has a unique address that is transmitted when a button is pressed. A "program" button is provided on the
receiver to program the transmitter(s) address into the receiver's memory. An LED on the receiver indicates the receiver's
programming status and illuminates when the receiver is energized. The receiver is encased in a waterproof enclosure.
The operating range is at least 100 feet.
Operating temperature range:
- 0° F to 160° F.
Polarity reversing output:
The transmitter has two buttons assigned to the motor output. The up (^) button runs the
motor in one direction and down (v) button runs the motor in the opposite direction.
Maximum ratings:
Power for the receiver can be in the range of 200 to 260 VAC. The relay contacts are rated at 20
Amps.
Dimensions:
Receiver dimensions are approximately 5.75" L x 4" W x 2.5" H.
For wiring detail, see schematic on page 3.
Page 1 REV A 04/22/20
(1) Long Range Antenna
