© Galvin Engineering Pty Ltd
Product Installation Guidelines
Version 1, 19 October 2022, Page
13
of
24
5. Re-fit service cartridges and then reassemble faceplate and spout (See section 7.0 Installation points 6 to 8).
10.2.2 THERMOSTATIC CARTRIDGE
1. Disassemble spout and faceplate (refer to 10.2.1
Strainer and Non-Return Valves - step 1).
2.
Turn the s t ng v ves t ‘C O E’ p s t n
3. Break/remove the plastic lock in the center of the
thermostatic mixing valve.
4. Use spanner size 28mm and turn the cartridge in the
counterclockwise fashion until it reached the end of
its threads. Pull the thermostatic cartridge out of the
mixer body.
Plastic lock
