Revision 4
56
August 02, 2019
5.2.4 Spectrum Curve Page
The
Spectrum
Curve
page (Figure 5-7) displays the present spectrum and lets the operator
change the integration time. The spectrum data is updated every second.
Figure 5-7: Spectrum Curve
The X and Y coordinates of a data point on the curve can be determined by moving the
mouse over the desired point on the spectrum.
The
Display Factory Reference
check box is used to indicate that the factory reference
spectrum should be superimposed on the collected spectrum. This feature is useful in
checking the system
The
Peak Height
,
First Vector Pixel
and
Dark Level
refer to the instantaneous readings for
those parameters.
Содержание 943-TGX
