Galvanic Applied Sciences 943-TGX, Руководство по эксплуатации

Страница: 17 / 110

Revision 4 17 August 02, 2019
2.2.5 Steam
Two supplies are required:
•
Nozzle: Pressure = 40-80 psi, maximum temperature = 160
o
C
•
Oven Heater: Pressure = 140-175 psi, maximum temperature = 200
o
C
2.2.6 Area Classification
2.3 Unpacking
The 943-TGX analyzer system is packed for shipment in a wooden crate.
To unpack the system:
a) Remove the lid by undoing the marked lag bolts.
b) Once the lid is off, remove the excess packing material, boxes and sample probe from
the shipping crate. The sample probe will be wrapped in packing material. Probes with a
guide length of 5.5 feet or longer are packed in a separate crate.
c) Visually inspect the small packages and the sample probe to ensure that no major
damage has occurred. If damage has occurred, contact the shipping company and
Galvanic Applied Sciences. Place the small packages and the sample probe aside in a
safe, secure storage area as they are not needed at this stage of the system installation.
The analyzer weighs approximately 275 lb/125 kg. Use suitable precautions
when removing it from the crate and placing it in the facility.
d) Locate and remove the four (4) bolts that secure the analyzer framework to the 2' x 4'
boards at the bottom of the shipping crate.
e) Once the bolts are removed the analyzer system can be lifted from the crate.
f) Lay the analyzer system frame onto a structurally strong and level surface and inspect for
any visual damage.
943-TGX-CE
Device Group: II 2 G.
Ex protection: II 2 G Ex d e ia mb px IIC T3 Gb.
Ambient Temperature: -20°C to +50°C.
943-TGX-CE
Steam is supplied to the nozzle only. There is no requirement for oven heater
steam on the 943-TGX-CE. There is no steam heater in 943-TGX-CE oven.