Operating
Instructions
800RB
Страница 1: ...Operating Instructions 800RB ...
Страница 2: ... effect any signal put into the return jack The level is 1 5V rms 4 5V P P into 100K ohm Direct Out This is an electronically balanced output that will put 500mv rms into a 600 ohm load It comes after the effects loop and is located on the rear panel Speakers Located on the rear panel are two sets of speaker jacks The upper set is for the 100W power amp and in the bi amp mode is used for the high ...
Страница 3: ...e and set up your sound in the full range mode first 4 Once your basic levels are set work with the voicing filters The Lo Cut is a bass roll off and is used to control stage rumble at high volume Mid Cut puts a notch at about 500Hz giving a mellow round sound Hi Boost adds edge and definition 5 Having set your levels and filters you are ready to fine tune your tone This is an involved procedure r...
Страница 4: ...GALLIEN KRUEGER 2240 PARAGON DR SAN JOSE CA 95131 US 408 441 7970 FAX 408 441 8085 EUROPE 41 42 234520 FAX 41 42 239525 ...
