Galleon NTS-6002, Руководство по оборудованию

Страница: 14 / 18

NTS-6002 HARDWARE MANUAL
14
TEL:
+44 (0) 121 608 4433
FAX:
+44 (0) 121 608 4477
www. galsys .co.uk
galleonsupport .com
CONFIGURATION
LCD STATUS
After connecting all components, power up the device for it to begin running the necessary
configuration processes. The LCD display will activate and show the following:
- LCD INITIALISED
- ASMINT DISPON 20M
Next, the unit will check for data coming into the serial connector:
- WAITING SERIAL DATA
The unit will display the current software version:
- Software Version 11
A time and date will then be displayed:
- Fri Jul 15 13:54:59
And the unit will seek to synchronise with either GPS or Radio:
- Waiting for 1st sync
- Fri Jul 15 13:56:30
During the waiting period for synchronisation, the unit will remain in an ‘unsynchronised state’:
- Unsynchronised
- Fri Jul 15 13:57:19
The unit will show that it ‘knows’ there is an antenna attached:
- GPS Antenna OK
- Fri Jul 15 13:58:31
Once in a ‘synchronised state’, the unit will display:
- Synchronised (GPS)
- Fri Jul 15 13:59:58
In this state, the display will show the GPS/Radio information as well as the date and time.
At all times, the unit will display the IP Address in the message cycle.