6
3E3020 Gallagher HR4 Hand Held EID Tag Reader User Manual
English
FEATURES
Feature
Description
Trigger
When in the ‘Read Tags’ (Collect) screen, pull the trigger
to begin reading tags.
Light
The red light flashes when transmitting and illuminates
continuously when a tag is read.
Vibrator
A single vibration is felt in the handle with every
successful EID tag read.
Antenna
The
HR4
antenna has a read range of 27–33 cm.
Note:
If there is more than one tag within range, neither
tag may be read.
USB
connector &
Dust cap
The supplied USB cable connects to the
HR4
via the
connector beneath the dust cap. This cable enables:
• data to be transferred to/ from a computer; and
• the supplied USB charger to charge the internal
battery.
Replace the dust cap when cable not in use.
Memory
• Over 100,000 EID records can be stored in the HR4.
• When the memory is 90% full, a pop up warning will
display.
• When the memory is full, no further tag reads will
be accepted until one or more sessions have been
deleted.
Auto Power Down
The HR4 will power itself down after 30 minutes of inactivity.
Screen
& Keypad
USB connector under Dust cap
Trigger
Light
Antenna
