17
3E3020 Gallagher HR4 Hand Held EID Tag Reader User Manual
English
Wireless
The HR4 Reader is both Bluetooth and WiFi enabled and can be
searched for and connected to by other devices (Discoverable),
or perform a search to initiate the connection itself. Only one
Bluetooth or WiFi device can be connected to the reader at any
time.
Note:
WiFi functionality is only available on HR4 v2 hardware.
Icon Descriptions
Icon
Description
Flashing
Searching for a Bluetooth or WiFi device
Steady
Blue
Bluetooth or WiFi device connected
Grey /
Red line
No Bluetooth or WiFi connection active,
but Reader is
Discoverable,
or Reader is
trying to connect to a device.
No icon
Bluetooth or WiFi disabled
Wireless Setup
1. From the Main Menu screen, use the arrow keys to select the
Wireless icon
and press
OK
.
2. The Wireless screen will display, showing the last known
connection as either Bluetooth (default for first time
connections) or WiFi.
•
To change the type of communication, select the field
where Bluetooth or WiFi is displayed and press
OK
. Use
the arrow keys to change the communication type and
press
OK
.
Note:
Selecting
None
will turn off Bluetooth and WiFi, and
will save battery power if a communication connection is not
required.
3.
The connection status and device table display and the
connection status changes to ‘Discoverable’ mode.