User Manual Galileosky Lite Trackers
14
Determination of strike and incline
All devices can determine the tracker`s strike and incline.
Accelerometer axis directions:
To determine strike:
1.
Install the tracker so as one of the accelerometer axis looks vertically, it will exclude false
detections on road bumps;
2.
Turn on strike and incline determination by SHOCK command (section
). For example, if Z axis is vertical: SHOCK 3,90,5,1200.
A strike is an acceleration increase in horizontal plane; the correspondent bit is put in the Device
state field and strike coordinates are recorded.
To determine incline:
1.
Install the tracker in vehicle;
2.
By SHOCK command set maximum allowable incline angle and allowable time of this
angle exceeding. For example, a maximum angle is 20º, allowable exceed time is 5
seconds; SHOCK 3,20,5,1200.
On the tracker homing position change in a vehicle, SHOCK command should be given to
adopt the tracker to a new position.
X
Y
Z
Accelerometer axis
directions
:
