BOXFINDER (0001) User’s Manual
RSA “Galileosky”, LLC.
Page
27
11.
Commands list
To request current settings you need to issue a command without any parameters.
11.1.
Setting for SMS control
Command format
AddPhone xxxx[,n]
Parameters
xxxx
- is a four-digit password, 1234 by default
n
– slot number (0-3) where a telephone number will be saved.
Explanation
When you configure the Tracker from a cell phone, you should first authorize it by
using the command. Up to 4 telephone numbers can be authorized.
Example
Request: AddPhone 1234
Reply: Phones (0)=89010123456 (1)= (2)= (3)=
Command format
ChangePass aaaa
Parameters
aaaa
– is a numeric four-digit password;
Explanation
Changing and viewing the current password.
Example
Request: ChangePass 5678
Reply: Password changed to '5678'
Command format
Phones P1,P2,P3,P4
Parameters
P1,P2,P3,P4
– authorized phone numbers written in international format
Explanation
Getting and setting the list of authorized phones
Example
Request: 7901012345,,,
Reply: Phones (0)=+79010123456 (1)= (2)= (3)=
11.2.
Data transmission settings
Command format
APN a,u,p
Parameters
a
– access point name;
u
– user;
p
– password.
Explanation
Access point settings for SIM0
Example
Request: APN internet.beeline.ru,beeline,beeline
Reply: GPRS:APN=internet.beeline.ru, user=beeline, pass=beeline
Command format
OPS0 n1,n2,n3,n4,n5,n6,n7,n8,n9,n10,n11,n12,n13,n14,n15
Parameters
n1-n15
– preferred GSM-networks.
Explanation
A list of preferred GSM-networks for SIM0. The network is defined by a mobile
country code and a mobile operator code (the list of codes is given in
http://www.itu.int/dms_pub/itu-t/opb/sp/T-SP-E.212A-2010-PDF-E.pdf
example, the Russian Federation code is 250.
Example
Request: OPS0 25001,25099
Reply: OPS0:25001,25099,,,,,,,,,,,,,;
Command format
OPS02 n16,n17,n18,n19,n20,n21,n22,n23,n24,n25,n26,n27,n28,n29,n30
Parameters
n16-n30
– preferred GSM-networks.
Explanation
Additional list of preferred GSM-networks for SIM0.
Example
Request: OPS02 25001,25099
Reply: OPS02:25001,25099,,,,,,,,,,,,,;