GalileoSky BOXFINDER, Руководство пользователя

Страница: 33 / 39

BOXFINDER (0001) User’s Manual
RSA “Galileosky”, LLC. Page 33
11.5. Service commands
Command format BSleep SleepTimeout,WakeUpByInput,WakeUpOnShock,ShockValue
Parameters SleepTimeout – time in “sleepmode” in minutes;
WakeUpByInput – switching to operating mode while input responding;
WakeUpOnShock – switching to operating mode while determination of strike;
ShockValue
– vibration value, which determines the strike, 600 = 1g.
Explanation Allows configuring the Tracker’s behavior in “sleepmode”.
Example Request: BSleep 100,0,1,60
Reply:
BSLEEP:SleepTimeout=100,WakeUpByInput=0,WakeUpOnShock=1,ShockValue=60;
Command format
PIN N
Parameters N – four-digit PIN-code of SIM cards.
Explanation SIM card PIN-code and password setting for access settings in the Configurator. The
default PIN-code is 0. If you enter the wrong code, the Tracker will be blocked for
25 seconds, and then reset.
Example Request: PIN 1234
Reply: PIN:1234;
Command format
EraseCfg
Explanation Setting default configuration.
Example
Request: EraseCfg
Reply: ERASECFG
Command format EraseTrack
Explanation Deleting all tracks from the memory.
Example Request: EraseTrack
Reply: ERASETRACK
Command format ColdStart
Explanation GLONASS unit’s cold start.
Example Request: ColdStart
Reply: GLONASS cold start
Command format Reset
Explanation Allows resetting the device remotely.
Example
Request: Reset
Reply: Reset of device. Please wait 15 seconds…
Command format Upgrade N
Parameters N – number of upgrading firmware. If 0 is set, the Tracker will be upgraded for the
last available firmware.
Explanation Upgrading firmware to the set one.
Example
Request: Upgrade 47
Reply: UPGRADE SOFT=47
Command format
RemoteConfig OnOff
Parameters
OnOff
– turning on the remote configuration function:
0 – remote configuration is off;
1 – remote configuration is on.
Explanation Turning on and off the remote configuration (section " Remote configuration ")
Example
Request: RemoteConfig 1
Reply: REMOTECONFIG:1;