GalileoSky BOXFINDER, Руководство пользователя

Страница: 18 / 39

BOXFINDER (0001) User’s Manual
RSA “Galileosky”, LLC. Page 18
GPRS. Not success
connect to server.
Device server connection is failed. The Server access is denied or wrong
server settings for the device.
GPRS. Reconnect
Number= №
Number of server reconnections.
№ - reconnection number.
GPRS. Firstpack OK. First packet has been sent to the server.
GPRS. Firstpack
False.[0]
The device has sent the first packet, but
there is no confirmation at TCP/IP level.
GSM network is overloaded. The
packet has been blocked by device
brandmauer or FireWall.
GPRS. Firstpack
False.[1]
The device has sent the first packet, but
there is no confirmation at the application
level.
GSM network is overloaded. The
server is not handling the first
packet.
SMS debug info
Troubleshooting message Description
SMS. RX SMS. A new SMS message is received
SMS. TelNum: +79112299922 received from a given phone number
Command: ID ID command is received
SMS. TX OK. Message is successfully sent
SMS delfromslot 1 handled SMS deleting (from the first SIM card slot)
Not reply SIM. Slot 1 no SIM card reply (from the first SIM card slot)
GSM. No SIM-card no SIM card reply (the card is probably not inserted)
Internal Flash-memory (tracks memory) debug info
Troubleshooting messages Description
MEM. Write point – 200 Point with sequence number 200 is recorded.
GPS-unit debug info
Troubleshooting information Description Possible causes
SAT. Coord refresh. Coordinates for current record have been
updated by GPS unit. The vehicle is considered
to be moving, packet has not been filtered off.
SAT. Coord not refresh. Coordinates for current record have not been
updated.
Filtering at stops is activated.
SAT. Temper is low than -40 Device temperature is lower than -40ºC.
Operation at lower temperatures is impossible.
SAT. Temper is high than 65 Device temperature is higher than +65ºC.
Operation at higher temperatures is impossible.
GLONASS. Message received.
Len = 401
Tracker received information from GLONASS
unit. 401 byte is received.
GPS. Message received. Len =
172
Tracker received information from GPS-module.
171 byte is received.
GPS. Change baud rate = 1 Attempt to set GPS unit rate. Attempt № 1.
SAT. Fix = 1 Current position is fixed (0 – not fixed);
SAT. SatInUse = 7 7 satellites are used for navigation;
SAT. Valid = 1 Coordinates are right (they can be used for
location determination). This Valid is not
related to valid in packet and status.
Galileo uses GLONASS Tracker uses GLONASS system.
SAT. Incorrect data from
GLNS/GPS module
Wrong data are received from the used unit
(probably because of processor overload)
SAT. Time out. Restart MCU Tracker gets no data from receivers (GLNS/GPS)
SAT. High Speed = 200 Navigation speed data filter turned on (these
data will be skipped by the unit).
SAT. HDOP is high = 6 Navigation HDOP data filter turned on (these