Galeo PC78MR-6 Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 295

background image

.

SAFETY

SAFETY INFORMATION

SAFETY INFORMATION

SAFETY RULES

Only trained and authorized personnel can operate and maintain the machine.
Follow all safety rules, precautions and instructions when operating or performing maintenance on the machine.
If you are under the influence of alcohol or medication, your ability to safely operate or repair your machine may
be severly impaired putting yourself and everyone else on your jobsite in danger.
When working with another operator or with a person on worksite traffic duty, be sure that all personnel
understand all hand signals that are to be used.

IF PROBLEMS ARE FOUND

If you find any problems in the machine during operation or maintenance (noise, vibration, smell, incorrect gauges,
smoke, oil leakage, etc., or any abnormal display on the warning devices or monitor), report to the person in charge
and have the necessary action taken. Do not operate the machine until the problem has been corrected.

WORKING WEAR AND PERSONAL PROTECTIVE ITEMS

Do not wear loose clothing and accessories. There is a hazard
that they may catch on control levers or other protruding parts.
If you have long hair and it hangs out from your hard hat, there
is a hazard that it may get caught up in the machine, so tie your
hair up and be careful not to let it get caught.
Always wear a hard hat and safety shoes. If the nature of the
work requires it, wear safety glasses, mask, gloves, ear plugs,
and safety belt when operating or maintaining the machine.
Check that all protective equipment functions properly before
using it.

FIRE EXTINGUISHER AND FIRST AID KIT

Always follow the precautions below to prepare for action if any injury or fire should occur.

Be sure that fire extinguishers have been provided and read the
labels to ensure that you know how to use them in emergencies.
Carry out periodic inspection and maintenance to ensure that
the fire extinguisher can always be used.
Provide a first aid kit in the storage point. Carry out periodic
checks and add to the contents if necessary.

SAFETY EQUIPMENT

Be sure that all guards and covers are in their proper position. Have guards and covers repaired immediately if
they are damaged.
Understand the method of use of safety features and use them properly.
Never remove any safety features. Always keep them in good operating condition.

2 - 13

«
...
26
27
28
29
30
...
»

Содержание PC78MR-6








































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для PC78MR-6

SpringerMAX-PRO

Бренд: ELGO-PLUS Страницы: 37

Бренд: New Holland Страницы: 41

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды