13
•
How to Start
1. Connect the power supply, and turn the switch to “I” position, chair is now in
idle mode.
2. During its idle mold only Power, Recline, Incline buttons can work.
Function Description
1.Power
• The power button starts and stops all functions on the massage chair.
• Press once, the chair is idle mode.
• Press again, all functions will stop, and massage rollers will return to original
position.
2.Pause
• The pause button will allow all massage functions to stop temporarily.
• Press once, all the massage functions and timer will be stopped temporarily.
• Press again to resume the massage session.
3.Time
• The timer button controls the length of the massage session.
• The default time for all massage functions is 15 minutes.
• Press each time to change the length of the time in the following sequence:
20>25>30>5>10>15.
4.Heat
• It controls lumbar heat function.
5.Spot
• This key with two functions: one is for spot massage and one is for making
roller upward.
• Press once, it will allow users to choose the exact position to massage.
• Hold the key and don’t release, it will move roller upward. When the roller
reach the position needed, stop holding the key.
• This can be applied to all massage selections.
6.Zone
• This key with two functions: one is for zone massage and one is for making
roller downward.
• Press once, it will allow uses to limit the massage in 12cm long to a particular
body zone.
07
Operation Guide
