User Manual Basic Operations
8
5. Front panel
STANDBY KEY:
To switch the receiver power on/stand by.
MENUKEY
:
To enter the Main Menu.
◄,
►
KEY:
To adjust volume level, or to move cursor left or right in the menu.
▲, ▼ KEY:
To change channels, or to move cursor up or down in the menu.
OK KEY:
To see TV/Radio channel list, or to confirm in the menu.
Remote Sensor:
Detects infrared signal from remote control unit.
POWER Indicator:
Lit whilst the receiver is powered on and at standby mode.
Signal Indicator:
When received signal is strong, the signal indicator is lit.
Card Slot:
One slot CA Interface for Conax Smartcard.
USB:
USB 2.0 Host, connect to USB hard disk, flash disk, WiFi dongle, 3G dongle or gamepad.
Display:
(VFD type) Indicates operating status of receiver.
Hold Smartcard horizontally with the electronic chip facing upwards. Then insert the Smartcard into the slot.