User Manual
Menu Operations
30
1.
Auto Standby: You can press[OK] and [Up/ Down]
key to select the time or “Off”, if you select time,
duration this time if no any operation on receiver, it
will go to standby mode.
2.
Deep Standby: If you
set to “On”, Press power key
receiver will be in real standby status, the
consumption wills less than 0.5 Watt.
If it’s set to
“Off”, Press power key, receiver will be in fake
standby status, just closed the screen.
3.
Standby LED Display: When you press power key
to the power indicator light ,if you select to “On”,
press power key will be lights, if it’s select to “Off”,
press power key will be not light. This function only
valid when the Deep Standby is off.
4.
Channel list Mode: This item provides below
options: 1/2/3, you can press [OK] and [up/ down]
key to select each mode circularly.
5.
Hard hearing: This function helps the hard of
hearing person. this function requires front-end
program support
6.
OSD Timeout: When you switch channels in full
screen, there will show up some information about
current channel on the lower of the screen. And
regarding to the duration of these information show
up on the screen, you can press [OK] and [up/
down] key to set the time. The range of the
duration is “1 second ~ 10seconds”.
7.
Subtitle Auto: You can press [OK] and [up/ down]
key
to select “On” or “Off”. If the current channel
has subtitle information, it will be showed up
automatically while this function is “On”, if this
function is “Off”, you need turn on the subtitle
manually by press [SUBTITLE] key on remote.
8.
Network Adult means that when you set to “On”, in
the APPLICATION menu display Youporn and
Redtube menu, press [OK] key, there will pop a
dialogue for you to input the password. When you
input the correct password,( the default Password
is same the system password with
“0000” ) the
default set is “Off”
9.
Front Panel: This menu is for the VFD panel
display mode, if you select channel NO. option,
VFD will display the channel name, and if you
select Time option, the VFD will display the current
time.
10.
Screen Saver for Radio: You can press [OK] and
[up/ down] key to select the time or “Off”, if you
select time, Radio full-screen playback duration
this time if no any operation on receiver, it will go to
Screen protect
11.
Page: This menu set to the page key with remote,
when you select “+/-” ,then press [PAGE+] key in
channel list will page to last page, press [PAGE-]
will page to the next page, instead of option “- /+” is
reversed.
12.
Debug: You can setting debug On/Off with this
menu.
13.
Remote Control: You can use this function to
control the receiver with mobile devices like a
Remote Control, (For example: mobile phone or
pad that support Android system), you can enable
or disable this function and setting a password as
you need.
14.
Press [menu] key to draw back from the
“Miscellaneous Settings” menu.
11.8 Software Upgrade
When you enter
to “Software Upgrade” menu, you will
see a screen like below:
