Galaxy Audio DSPOT, Руководство пользователя, Страница: 7 / 40

● Menu “UTILITY” [access by pushing the “UTILITY” button]
From the “Default Screen”, it is possible to access the “UTILITY” menu by pushing the “UTILITY”
button and the Sub-Menus pages can be selected by rotating the “NAV/PM1” encoder clockwise
and counter-clockwise.
Once selecting the sub-menu page, using the “ENTER” button will access the Sub-Menu pages,
again “scrollable” using the “NAV/PM1” encoder and accessible for parameter editing again
pushing the “ENTER” button.
Through the “ESC” button, it is any time possible to go back to the page preceding the “ENTER”
button use.
Once inside the Sub-Menus pages, several options can be scrolled and using the PM2 or PM3
encoders and selected/confirmed pushing the “ENTER” button.
Note: In every Sub-Menu the option currently selected/running will have an asterisk “ * ” showing
to the right of the description on the LCD screen.
Options that are not selected/running will be displayed without an Asterisk.
Pushing the ENTER button on an unselected option will mean an asterisk will then appear and this
option will now take over as the currently selected/running option.
System Utilities Sub-menu – this sub-menu allows to access several operations related to the
DS-SP24 Start Up and General Configuration:
From the “System Utilities Sub-menu”, pushing “ENTER” and then using the “NAV/PM1”encoder
for scrolling will give access to the following pages:
– System Setup: this page allows the selection of the operating mode of the DS-SP24:
The operating mode can be chosen from a selection of 2 Xover options
1x 2 WAY ........ .in this operating mode, the DS-SP24 is configured as a 2 Input to 4 Output X-Over,
where the 2 Inputs are automatically assigned to the Outputs as follows:
– Input A to Outputs 1/2 [Out1=LowA and Out2=HighA]
– Input B to Outputs 3/4 [Out3=LowB and Out4=HighB]
4 WAY ....... . .in this operating mode, the DS-SP24 is configured as a Mono Input to 4 Output
X-Over, where the Input A is automatically assigned to the Outputs as follow:
– Input A to Outputs 1/2/3/4 [Out1=Band-1, Out2=Band-2, Out3=Band-3 and Out4=Band-4]
By pressing ENTER on the System Setup page and rotating the “PM2” or “PM3” encoder, it is
possible to select all the available X-Over preset modes.
UTILITY MENU
- System Utilities -
SYSTEM UTILITY
- System Setup -
6