GALA LAGUNA, Руководство по установке

Страница: 7 / 12

247
Gala hydromassage baths are manufactured using top quality materials. Before reaching its destination,
each hydromassage bath has been subjected to strict technical and safety controls.
In order to ensure the correct operation of your hydromassage bath, please follow the instructions below:
1. The installation must be carried out by qualified personnel and in accordance with the current
regulations of each country.
2. The bath’s protective elements must remain in place until the installation work has been completed in
order to prevent the risk of damage. The bath must be lifted by its frame, not dragged or lifted by its pipes.
3. Before installing the bath, check that no damage has occured during transportation or handling.
The hydromassage bath must be installed in accordance with the INSTALLATION INSTRUCTIONS
corresponding to each model, which are enclosed with the bathtub, paying special attention to the
following points:
1. Before installing the bath, fill it with water and check that there are no leaks and that all the
hydromassage bath elements operate correctly.
2. When applying silicone respect the indicated measures in order to avoid the small vibrations that can
cause the motor of the bathtub during the normal functioning
THE BATHTUB MAY BE FRONTED IN TWO DIFFERENT WAYS:
1- MASONRY WALL
.
BATHTUB INSTALLATION
English
Installation manual
1. Take care to leave a 2-3 mm. space
between the bath and the wall in order to be
able to seal the joint with silicone (Fig. 1).
2. The motor area must be enclosed, but
accessible for possible repairs. A grille
must also be provided for ventilation of the
hydromassage bath equipment.
3 mm
Fig-1
INTRODUCTION