Gait Up SA
EPFL Innovation Park, Bat C. CH-1015 Lausanne
www.gaitup.com
TVA CHE-145.136.760
PhysiGait Lab user manual v1.3.1 Date: 29.04.2019
Copyright ©2018, All Rights Reserved - Gait Up SA. CH-1015 SWITZERLAND
3
1. PhysiGait Lab elements
2. Gait recording with Physilog
®
5 - Basics
* See section 5.2 for early
firmware versions
Attach
Fix the sensors on the
feet/ shoes using the
rubber clips or foot
attachment straps.
Start
Start the
recording by
pushing the main button
for 2 seconds, the LED
becomes green and turns
off when the sensor is
starting.
Walk
Wait until the two sensors
blink green
synchronously
and ask the subject to
walk according to your
protocol.
Stop
Stop the sensors* by
pushing the main button
for 3 seconds until the LED
turns orange. The LED
blinks green 3 times when
the sensor is correctly
stopped.
Plug
Connect the Physilog
®
to
the computer via the USB-
micro USB cable
Save to PC
Copy-paste the .BIN files
from the Physilog
®
to the
computer for analysis
