Gait up GAIT UP GO Скачать руководство пользователя страница 21

Страница: 21 / 51

●

Open the packaging delivered together with the Gait Up GO medical device

●

Take the Physilog6 sensor device and the USB cable out from the packaging

●

Connect the USB cable (USB-C side) to the Physilog6 sensor device

●

Connect the USB-A part of the USB cable to a computer or to a mobile phone charger

compatible with the specifications listed in section 9 of the present document

●

Make sure that the Physilog6 sensor device is fully charged (when battery charging is

complete, the LED on the Physilog6 sensor device body will shine green)

●

When the charging is complete, the device is ready to be used.

4.3 Charging of the Physilog®6 sensor device

The Physilog6 sensor device is a wearable sensor powered by a Lithium-Ion rechargeable

battery. It is not possible to recharge the battery during the device operation. That is why,

please check the battery level of the Physilog6 sensor device on the Gait Up GO Mobile

Application screen before starting any test (see section 4.5.5).

●

Plug one end of the USB cable (USB-C end) into the Physilog6 sensor device USB-C

port.

●

Plug the USB-A end of the UCB cable into a computer or a mobile phone charger with

specifications compatible to the ones listed under section 9 of the present document,

●

During charging, the LED on the Physilog6 sensor device emits a blinking white light,

even when the sensor device is not connected to the Mobile Application.

●

When the charging is complete, the LED on the Physilog6 sensor device will shine

green and the battery level shown in the Gait Up GO Mobile Application will appear as

full.

It is important to charge the Physilog6 sensor device for at least 4 hours before an assessment

session is started.

Note: It is recommended to charge the Physilog6 sensor device at the end of each session.

Note: Use only the USB cable provided by the manufacturer.

Note: Use only mobile phone chargers provided by your Healthcare Professional.

4.4 Checking system components and their functionality

●

Visually inspect all the components of Gait Up GO medical device (Mobile

phone/tablet, Physilog6 sensor device, clip accessories and USB cable) for signs of

damage, especially in correspondence of connectors, primary packaging (casing)

where the Physilog6 sensor device and the clip accessories are contained.

ENGLISH

21/51

Содержание GAIT UP GO




















































Результаты поиска

Содержание GAIT UP GO

Отзывы:

Похожие инструкции для GAIT UP GO

Бренды по названию

Популярные бренды

Gait up GAIT UP GO, Инструкция по эксплуатации

Результаты поиска

Содержание GAIT UP GO

Отзывы:

Похожие инструкции для GAIT UP GO

Бренды по названию

Популярные бренды