11
/
12
15. Branding Settings
Send a command enable you to use your own brand in the reply text message. It is default as Null
This is a factory command. Only manufacturer is able to send this command.
SMS:
*brd*XXX*
(XXX refers to the new brand name)
Device Response:
“XXX inform: The new brand name is set.”
16. Command Setting List
Function
SMS Command
Description
APN Setting
*apn*AXXX*BXXX*CXXX*
This command sets the telecom
Access Point Name. BXXX refers to
user name, CXXX refers to password.
Master Setting
*master*1XXXXXXX* +1 refers to the country code.
XXXXXXXX is the cell phone number.
Please make sure country code is
included, and 0 is not needed before
cell phone number
Password Changing
*password*654321*
Original password is default as 123456.
654321 refers to new password.
Vibration Sensitivity
Setting
*sensitive*1-5*
1 being the most sensitive, 5 the least.
Default setting is 1.
Alert Setting
*callalert*
Call alert will call master number 2 times
when motion is detected after 3 minutes
non-movement.
*smsalert*
SMS notification will sent to master
number when motion is detected after 2
minutes non-movement.
*alertoff*
End Call/SMS alert
LLC Query
*locate*
Latest information of latitude, longitude,
date, time and ranking.
Address Query
*locateaddress*
Address information of current location.
Google Map Search
*locatemap*
Google Map link with current location.
Routetrack Setting
*routetrack*1-99*
1-98 represents hours of accumulated
data, 99 means always on.
Routetrack Sampling
*rsampling*1-999*
1-999 represents seconds of data
collecting
interval,
default
as
10
seconds.
Routrack Upload
*rupload*60-999*
60-999 represents seconds of data
uploading interval, default as 60
seconds, minimum rate should not be
less than 60.
Routetrack Off
*routetrackoff*
End routetrack function.
Check Function
Setting
*check*0-99*
0-99 represents hours of data upload
interval, default as *check*0*
*checkm*10-99*
10-99 represents minutes of data
upload interval