Installation
CommandPLUS Series Desktop Console Installation and Service Manual
09/07 14
Types of Base Station Control
The CommandPLUS Console is capable of either tone or dc control depending on the position of jumpers
JU620 through JU623. For dc control, the console must have option CP0010 or XCP0010. Refer to Table
2.
Table 2. Jumper Positions for DC or Tone Control Selection
Function Jumper
No. Position
Ch. 1, 5, 9
JU620
IN
OUT
Tone Control
DC Control (option CP0010 or XCP0010)
Ch. 2, 6, 9
JU621
IN
OUT
Tone Control
DC Control (option CP0010 or XCP0010)
Ch. 3, 7, 11
JU622
IN
OUT
Tone Control
DC Control (option CP0010 or XCP0010)
Ch. 4, 8, 12
JU623
IN
OUT
Tone Control
DC Control (option CP0010 or XCP0010)
N
OTE
:
If operating in dc mode, the console must also be programmed for dc under Type of Interface in the
CARD Software.
Two
Wire
Control
(default)
In this configuration, a single two-wire line is used to carry the control tones or dc control currents (as
applicable per channel) and the transmitter audio, from the CommandPLUS Series Console to the base
station. This same 2-wire line is used to return the receive audio back to the console from the base station.
Refer to Table 3 for the appropriate system configuration.
Four
Wire
Audio/Control
In this configuration, one pair of lines is used to carry both control tones or dc control currents (as
applicable per channel) and the transmitter audio from the CommandPLUS Series Console to the base
station. The other pair is used to carry the receive audio from the base station back to the console. Refer
to Table 3 for the appropriate system configuration.
N
OTE
:
In this configuration, RX audio can still be received on original 2-wire pair.
Table 3. Slave Module – 2-Wire/4-Wire
Function Jumper
No.
Position
Ch. 1, 5, 9 – 2W/4W Select
JU602
2W – 2 wire control
4W – 4 wire control
Ch. 2, 6, 9 – 2W/4W Select
JU606
2W – 2 wire control
4W – 4 wire control
Ch. 3, 7, 11 – 2W/4W Select
JU610
2W – 2 wire control
4W – 4 wire control
Ch. 4, 8, 12 – 2W/4W Select
JU614
2W – 2 wire control
4W – 4 wire control
