Gaggenau VP414115, Руководство пользователя и инструкции по установке

Страница: 9 / 20

Troubleshooting
en
9
2.
Follow the instructions on the packaging for the
cleaning gel.
3.
Apply the cleaning gel to the dirt and leave it to
work for at least 2 hours.
‒
Leave heavy soiling overnight.
4.
Rinse the cleaning gel thoroughly from the frying
surface.
Clean greasy dirt on the frying surface with the
"Wiener Kalk" cleaning powder
1.
Follow the instructions on the packaging for the
powder detergent.
2.
Make a paste from the cleaning powder and water.
3.
Wipe with the paste in the brush direction of the sur-
face and clean the frying surface.
8.3 Cleaning the frying surface between two
roasting processes
Ice cubes are better suited than water for cleaning the
appliance when hot as they cause less splashing and
steam.
WARNING ‒ Risk of burns!
Splashing and steam occur when water or ice cubes
are poured onto the hot frying surface.
▶
Do not lean over the appliance.
▶
Maintain a safe distance.
1.
Switch off the appliance.
2.
Use the spatula to push approx. 4 or 5 ice cubes
over the hot frying surface.
3.
Use the spatula to remove dirt that has begun to
soften.
4.
Switch on the appliance.
5.
Wait until the set temperature has been reached.
a The illuminated ring on the control knob lights up
continuously.
6. Place the food on the frying surface.
8.4 Cleaning the stainless steel frame
1.
Clean the stainless steam frame using hot soapy
water and a dish cloth.
‒
Use only a small amount of water for cleaning.
‒
Do not allow water to get into the appliance.
2.
Soak burnt-on remains with a small amount of
soapy water.
Do not scour burnt-on remains.
3. Remove heavy soiling or yellow discolouration
caused by heat using the stainless steel cleaner.
4. Dry with a soft cloth.
8.5 Cleaning the control knob
Notes
¡
Do not use a glass scraper.
¡
You cannot remove the knob for cleaning.
¡
Lemon and vinegar are not suitable for cleaning and
may create dull patches.
1.
Clean the control knob with warm soapy water and
a soft cloth.
2.
Do not use too much water when cleaning.
8.6 Cleaning the spatula
1.
Clean the spatula using soapy water and a dish
cloth.
2.
Clean the spatula in the dishwasher as necessary.
9 Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
If the appliance is defective, call Customer Service.
WARNING ‒ Risk of electric shock!
Incorrect repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
Only use genuine spare parts when repairing the
appliance.
▶
If the power cord of this appliance is damaged, it
must be replaced with a special connection cable,
which is available from the manufacturer or his Cus-
tomer Service.
9.1 Malfunctions
Fault Cause and troubleshooting
The appliance is not
working. The mains plug of the power cord is not plugged in.
▶
Connect the appliance to the power supply.
The circuit breaker in the fuse box has tripped.
▶
Check the circuit breaker in the fuse box.
There has been a power cut.
▶
Check whether the lighting in your kitchen or other appliances are working.